Workshop showing how to come close to a given sound taken from a famous standard.
Target recordingTarget recording   MIDI file
This is the recording we want to simulate. For copyright reasons, we present here only a short excerpt which is enough for our purpose.
Choosing a presetChoosing a preset   FXP
The first thing to do is to select the preset that will serve as starting point. Nothing comes really close so we we select here the D4 Classical AB preset.
Microphone setting and reverberationMicrophone setting and reverberation   FXP
We start with microphone position. The original recording is almost mono so we place two microphones very close together (distance one centimeter). We select the Long Plate reverberation.
EQ, dynamics, hammer hardnessEQ, dynamics, hammer hardness   FXP
We now adjust equalizer, dynamics, volume and hammer hardness. Because the original recording is highly compressed, we reduce the dynamics to 15 dB. We increase the hammer hardness, and adapt the EQ to the recording by increasing the 2500 Hz range and reducing the 4000 Hz range.
Tuning and hammer noiseTuning and hammer noise   FXP
We increase the unison width parameter by a factor no less than 3 to obtain a similar detuning as shown by the original recording. We also reduce the direct sound duration to come closer to the compression effect of the recording and we increase the hammer noise.
VoicingVoicing   FXP
We now leave the global settings and work on the final voicing by adjusting the overtones note per note in the midle range. That can take a certain time, depending on how close we want to get.
MasteringMastering   FXP
Finally we feel that the original recording has been somewhat compressed so we use the internal Pianoteq compressor to get closer to the target sound.